| We list below some of the software we market, support and upgrade. Some of it we (STA) have developed ourselves and some we market and support for others.
Stewart Technology Associates regularly uses all the programs listed below on engineering projects & economic studies.
These prices are general guideline prices for STA Products. More details of each product & options associated with each, are available upon request. In some cases discounts are available for multiple copy purchases; in others there is no restriction on the number of copies a client may use simultaneously.
|
|
|
JACK-UP SIMULATOR
|
JUSIM, v2.0, Jack-up Simulation
Software w/P-Delta effect |
$2,500.00 |
STA BARMOT
|
Barge Motions Analysis, with Non-Linear Roll, in the frequency Domain. Produces RAOs for direct input to OrcaFlex. |
$5,000.00 |
| BALLAST CONTROL SIMULATOR |
BMS, Ballast Control and Mooring
Simulation Software |
$8,000.00 |
STA 2-POINT
|
STA 2-POINT, Static analysis of
Two Point Mooring Systems In Shallow Water |
$1,500.00 |
STA HYDROSTAB
|
Large Angle Hydrostatic Stability analysis of
Barges with Raked Ends, including large angle wind heeling moments |
$2,500.00 |
STA SPM
|
STA SPM, Single-point moored tanker
with multiple vessel capacity |
$4,000.00 |
STA LIFTBOAT
|
STA LIFTBOAT, v1.0, wave/wind/current
static and dynamic response of elevated liftboats |
$7,500.00 |
STA JACKWAVE
|
STA JACKWAVE, v4.0, Jack-up Wave
Loading and Response Analysis Using Airy Waves |
$8,000.00 |
STA JACKWAVE
|
JACKWAVE Leg/Hull Files, for v4.0,
Customized Jack-up Leg Structural Properties w/dynamics* |
$4,000.00 |
STA JACKLOAD
|
STA JACKLOAD and STA SEMILOAD afloat
stability, variable load form and preloading for jack-ups. |
$5,500.00 |
STA SEMILOAD
|
STA SEMILOAD, Afloat stability and
variable load form for semis (customized to rig) |
$5,800.00 |
STA CRANEBARGE
|
STA CRANEBARGE for planning of lift operations on a floating crane barge. |
$8,000.00* |
STA DOWNTIME
|
STA DOWNTIME, Downtime comparisons
between rigs and drill ships, based upon vessel motions* |
$3,600.00 |
STA CABLE
|
STA CABLE, v2.0, 2-D, Static Large-Deflection
Analysis of Cables & Masses Suspended in Currents |
$350.00 |
STA CATENARY
|
STA CATENARY, 2-D, Static Catenary
Analysis Program w/graphics |
$350.00 |
STA ANQUICK
|
STA ANCQUICK, Anchor selection
and sizing API/US Navy/STA |
$1,300.00 |
STA ANCHOR
|
STA ANCHOR, predicts anchor drag
embedment trajectory in sea bed; finds anchor capacity |
$6,800.00 |
STA PILE3
|
STA PILE3, Anchor pile program,
suited to design of normally driven and suction pile anchors |
$5,000.00 |
STA CHAIN
|
STA CHAIN, Buried Anchor Chain Program;
Geometry and Forces w/graphics |
$1,500.00 |
STA PULLOUT
|
STA PULLOUT, program for plate
and VLA anchor design and analysis |
$1,500.00 |
STA TANKER
|
STA TANKER, Environmental loads
and dynamic offsets for spread-moored tankers |
$500.00 |
STA LAYMOOR
|
STA LAYMOOR, Tool for laying out
a mooring system |
$450.00 |
STA WAVECOMP
|
STA WAVECOMP, Comparison of Alternative
Wave Theories, compares kinematics and forces |
$300.00 |
STA BOTSTAB
|
STA BOTSTAB, On-bottom stability
analysis for sea bed pipelines |
$3,000.00 |
STA PRELOAD TUTOR
|
STA PRELOAD TUTOR, Preload simulator
for jack-ups with emphasis on punch-through |
$4,000.00 |
STA RIGMAN
|
STA RIGMAN, (with BP) Mooring and
riser management advisor for floating drilling rigs* |
$30,000.00 |
STA TLR
|
STA TLR, (with Mobil) Optimization
of Mobil-patented tension-leg-riser SCR structures |
$20,000.00 |
AQWA
|
AQWA Suite from WS Atkins – hydrodynamic
analysis of floating structures |
Contact ANSYS |
| |
|
|
ORCAFLEX
|
Visual ORCAFLEX, 3-D, Time-Domain
Analysis of Flexible Marine Systems with irregular waves |
Contact Orcina |
| |
|
|
ORCABEND
|
ORCABEND, Bend stiffener design
program |
Contact Orcina |
* Customization by STA at additional cost |
